Sportswear Frost White HO

Applies to :
Sportswear Frost White is great for light to dark garments, 100% Cotton, Cotton Polyester Blends, Acrylic, Polyester, Polypropylene, Spandex and stretchable substrates

General Info:
Considered the MOST versatile white in the WM arsenal. Sportswear Frost White was formulated to have a slightly heavier body than other WM whites to matt down fibers. It can be used as an underlay, as a highlight white, and can be printed through mesh counts up to 230.

Bleed Resistance: Excellent
Opacity: High
Storage: 70° to 80°F.
Due to the ability to cure at low temperatures, this is extremely important. Ink will
become thicker over time but can be reduced to a printable viscosity.
Mesh: 61-230
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications: Modifications are not recommended unless completely necessary. To reduce viscosity
use Curable Reducer (110-9906), improve stretch use G&S Base (110-1020) & puff use Puff Additive
(110-9903). ANY modification will effect Low Cure properties.
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing: 700°F for 3-5 seconds, just enough for the surface to be tack free.
Squeegee Blade: 65 Duro.
Fusion/Curing: 260°F/127°C-325°F/163°C
for 1 to 1 ½ minutes. Oven temperature can be increased and
dwell time decreased. For heat presses use 390°F/195°C for 8 seconds.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.

What’s more, we can supply custom mix inks, all printing products. in additionally get  Free Shipping Over $250
Click To See Our Clearance-Items