General Info:
High Opacity (HO) inks are formulated to be directly printed onto medium to dark colored, 100% cotton
garments. These inks provide great coverage and have a creamy body unlike most High Opacity inks,
therefore making the ease of printing more simple.
Mesh: 86-240 (34 to 110 threads per cm)
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
(I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff
or dulling use Suede Additive (I10-9907).
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing: 700 F for 9 seconds, just enough for the surface to be tack free.
Squeegee Blade: Sharp.
Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time
decreased. For heat presses use 390 F/195 C for 8 seconds.
Bleed Resistance: None
Opacity: High
Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.