WM SOFT COTTON WHITE

General Info:
Soft Cotton White is our premium cotton white, formulated for the printers who want the softest feeling
white possible. When printed through high mesh counts this white provides a feel that could be mistaken for
water-base. The combination of opacity, extreme soft feel and ease of printing makes this white stand above
all other cotton whites in today’s industry.
Mesh: 86-305
Stencil: Any direct emulsion or capillary film
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications:
(I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or
dulling use Suede Additive (I10-9907). Nylon Bonding agent is not recommended to be used with this
product.
To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing: º
700 F for 6 seconds, just enough so the surface is tack free.
Squeegee Blade: Sharp.
Fusion/Curing:
For heat presses use 390 F/195 C for 8 seconds.
325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time
Bleed Resistance: None
Opacity: High
Storage:
Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
Special Notes:
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.
PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on