General Info:
Ultimate White is our top selling, high-opaque, low-bleed white. It was formulated to be extremely bright
and provide the ultimate ease of printing through mesh counts up to 300, while at the same time providing
unmatched bleed resistance and body characteristics that other manufactures have failed to duplicate.
Mesh: 86-300
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications: puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or
dulling use Suede Additive (I10-9907).
To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
(I10-1020)
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing: º
700 F for 2 seconds, just enough so the surface is tack free.
Squeegee Blade: Sharp.
Fusion/Curing:
325 F/175 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
Bleed Resistance: Great
Opacity: High
Storage:
Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
Special Notes:
white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test
on fabric to be printed.