Applications
-Light colored garments
-Cotton
-Glitter base
-Foil adhesive
-Stretch Additive
Features
-Clear
-Easy to mix
-Easy to print
General Info:
G&S base is a multi-use base that can be used as a stretch additive, glitter base, foil adhesive,
underlay for stretch, and can be used with a Pigment Concentrate (PC) system.
Mesh: 40-230.
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Squeegee Blade: Sharp.
Fusion/Curing: 325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time
decreased. For heat presses use 390 F/195 C for 8 seconds.
Bleed Resistance: None
Opacity: Low
Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.