WM HOT SPLIT ADDITIVE

Applications
-Cotton, poly/blends
-Transforms a regular ink into
a transfer ink
Features
-Provides a soft hand
-Creamy body for ease of mixing
General Info:
Hotsplit/Transfer additive was designed to allow a printer to use their current ink inventory as a
transfer ink and make as needed.
Mesh: 86 a minimum of 2.1 mils is required for a good transfer
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Not recommended.
Squeegee Hardness & Angle: Does not impact squeegee hardness & angle.
Squeegee Blade: Does not impact squeegee blade to use.
º º Fusion/Curing: The ink should only be slightly gelled by heating the ink up to 180 -250 F in the oven.
º º The final curing process is done with the heat transfer press at 350 -400 F for 5-10 seconds. Remove
carrier paper immediately.
Bleed Resistance: None
Opacity: None
º º
Storage: Ideally 65 to 80 F. Keep out of direct sunlight. Printed transfer can last up to a year.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.