WM BLACK CREAM

Applications
-Direct printing
-Light to dark colored garments
-Cotton, cotton blends & polyester
Features
-Creamy body
-Soft hand
-Excellent printability
-No build-up
General Info:
Black Cream is a premium high performance black ink that is formulated with a super creamy texture
that will not water down like most blacks. This black has the highest mat down properties and is more
intense in color than any of our other blacks.
Mesh: 86-300
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet for short runs but will build.
Modifications: puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff
or dulling use Suede Additive (I10-9907).
To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
(I10-1020)
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing:
700 F for 8 seconds, just enough so the surface is tack free.
Squeegee Blade: Sharp.
Fusion/Curing:
decreased. For heat presses use 390 F/195 C for 8 seconds.
325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time
Bleed Resistance: None
Opacity: High
Storage:
Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
Special Notes:
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.
PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on