Applications
-Direct printing
-Light to medium colored garments
-Cotton, Cotton/polyester & 100% polyester
Features
-Creamy body
-Extremely Soft hand
-Excellent printability
-No build-up
General Info:
Just so Soft Black is an extremely soft black that was formulated to mimic the feel of a water base print.
This black is intense in color, easy to print and provides the softest feel of all our blacks. When printing onto
garments with the potential to bleed, a low bleed underlay needs to be printed first. Also available in a base.
Mesh: 110-300. The higher the mesh count, the softer the feel.
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Should be printed last to minimize build-up.
Modifications: To reduce viscosity use Curable Reducer (I10-9906)
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle. The higher the squeegee pressure
is, the softer the feel
Flashing: Not recommended.
Squeegee Blade: Sharp.
Fusion/Curing: 325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time
decreased. For heat presses use 390 F/195 C for 8 seconds.
Bleed Resistance: None
Opacity: High
Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed. When printing onto garments that have the potential to bleed, a low bleed
underlay needs to be utilized.