WM GLOW STRONG

Applications
-Direct printing
-White garments
-Cotton
-Cotton/Polyester, Acrylic &
Polyester garments (with LB underlay)
Features
-Ready to use
-Extremely bright
-Long lasting
-Glows a brilliant green
General Info:
Great for novelty items. Our glow-in-the-dark ink has an extremely high pigment loading, compared to
other manufactures, therefore providing a brighter and more long lasting glow. I-10-9965 is ready to print,
but WM does offer the powder and base for sale so the printer can mix his own glow ink at any strength
he wishes.
Mesh: 86-110
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications:
puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff
or dulling use Suede Additive (I10-9907).
Reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base
(I10-1020)
Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
Flashing:
700 F for 9 seconds, just enough for the surface to be tack free.
Squeegee Blade: Sharp.
Fusion/Curing:
decreased. For heat presses use 390 F/195 C for 8 seconds.
325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time
Bleed Resistance: None
Opacity: Medium
Storage: º º
Ideally 65 to 80 F. Keep out of direct sunlight.
Wash-up: Any plastisol cleaner.
Special Notes:
white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test
on fabric to be printed.
PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a