General Info:
Puff additive was designed to allow a printer to add to an ink to provide a raised, puff effect. Surface
is slightly rougher compared to the suede effect
Mesh: 60-110
Stencil: Any direct emulsion or capillary film.
Wet on Wet Printing: Not recommended.
Squeegee Hardness & Angle: Does not impact squeegee hardness & angle.
Squeegee Blade: Does not impact squeegee blade to use.
Bleed Resistance: None
Opacity: Great
º º
Storage: Ideally 65 to 80 F. Keep out of direct sunlight. Printed transfer can last up to a year.
Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on
a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.